CUMMINS PT INJECTOR TEST STAND Click for a close look



CUMMINS ELECTRONIC CELECT INJECTOR TEST STAND - new!
(SERIES PT1000)


INJECTOR LEAKAGE TESTER
STC Top Stop Test Stand with digital indicator
Injector Disassembly & Assembly Stand
Injector Cup SprayTester
Accessories - cams, adaptors & links

MAIN FEATURES AND TECHNICAL SPECIFICATIONS

Cummins PT Injector Test Stand, Doctor Series
(ESPECIFICACIONES TECNICAS DE BANCO DE PRUEBA PARA PT INYECTORES)
Leakage Tester


DOCTOR SERIES, MODELS PTW200, PTW200A

Doctor Series, Model PTW200

This model test bench is designed and used to test and calibrate Cummins PT injectors.
The flow is measured by flowmeter, test oil temperature is controlled automatically.
It has advance driving system.

The test bench is supplied with full set of accessories for calibrating latest type Top Stop Setting Fixture
Cummins PT injectors.

MAIN FEATURES:

... High accuracy of measuring. The measuring error is only +/- 0.1ml
per 1000 cycles
... The cycles are selectable from 50 to 100 cycles, according to the types of PT injectors
... With simulator of injecting back pressure, it is able to simulate the compression
pressure that the fuel is injected into the cylinder of an engine. The test condition of
PT injector on Test Bench is the same as that in an engine
... Different types of cams are provided for testing various types of PT injectors. Top Stop Setting Stand (STC)
The cams can be replaced easily
... With automatic oil temperature control system, the test oil is kept constant
temperature to meet testing conditions
... With fuel pressure gauges, the system pressure can be adjusted easily to
ensure the stability of the fuel pressure in the test and the accuracy of test results
... When starting the test, the fuel is supplied automatically to the test system
... With interlock circuit safety system of control buttons
... Integrated component of fuel circuit is adopted, the reliability
increased, operation and maintenance become much more convenient
... Easy to clamp and discharge the tested injector
... Compact structure, very low noise
... Complete set of accessories for calibrating latest type Cummins
PT injectors, including cams, adaptors and linksDismounting Stand (pneumatic)

MAIN TECHNICAL SPECIFICATIONS:

... Range of flowmeter: 0-700 ml/min
... Oil supply pressure: 100 PSI
... Pressure of nose cone assembly: 350 PSI
... Rotary Speed: 1050 rpm
... Speed control accuracy: +/- 1 rpm
... Test oil temperature: 40 degrees, automatic control
... Temperature control accuracy: +/- 1 degree
... Cam driving motor: 2.50 HP
... Power Supply: 380V, 50 Hz, 3 Phase or 220V, 60 Hz, 3 Phase
... Measurement: approx. 2.00 CBM Dismounting Tool
... Weight: approx. 420 kgs

ORDERING INFORMATION (MODEL PTW200):

Part No.         Description
450-2001      380V, 50 Hz, 3 Phase
451-2001      220V, 60 Hz, 3 Phase

Doctor Series, Model PTW200A

This model test bench has the same features and specifications
as model PTW200, except its operating panel and outlook appearance.

ORDERING INFORMATION (MODEL PTW200A):

Part No.         Description
450-2002      380V, 50 Hz, 3 Phase
451-2002      220V, 60 Hz, 3 Phase

CUMMINS TOOLS & EQUIPMENT

INJECTOR LEAKAGE TESTER
Type PTW001, Part No. 450-2101
The tester is mainly used to test the leakage property of PT injectors.

INJECTOR TOP STOP FIXTURE
Type PTW002, Part No. 450-2102
The device is mainly used to test and adjust the moving distance of injector plunger with top setting.

STC TOP STOP STAND (STC with digital indicator)
Type PTW002A, Part No. 450-2202
The equipment is also used to test injectors with STC device.

INJECTOR DISASSEMBLY & ASSEMBLY STAND
Type PTW003A, Part No. 450-2203
The stand is mainly used to disassemble and assemble PT injectors. Its pneumatic cylinder mechanism
has been designed and developed instead of manual screw mechanism.

INJECTOR DISASSEMBLY & ASSEMBLY TOOL
Type PTW003, Part No. 450-2103
The tool is mainly used to disassemble and assemble PT injectors. It is with manual screw mechanism.

INJECTOR CUP SPRAY TESTER
Type PTW006, Part No. 450-2106
The tester is mainly used to test injector cups.

NOTES:

- Test benches with other supply voltages are available, such as: 190-208V, 230V,
240V, 250-275V, 340-350V, 400V, 415-440V, 460-480V, 500V, 575V.
- Special orders are acceptable and will be supplied as per special requirements.


Technical specifications are subject to change without notice.




Home  |  Privacy Policy  |  Site Map  |  Contact Us  |     
Jingfeng Test Equipment Co Ltd.  Copyright © 2011-2013.  All Rights Reserved
Inquiry: jingfeng@szonline.net      Information:  pumptester@hotmail.com